City of Industry, CA · A rare residential job

Kitchen Remodeling in City of Industry, CA

The City of Industry has only a few dozen homes, so every kitchen job here is a one-off. We plan it carefully, price it in writing and do the work with our own crew.

Get Your Free Estimate Call (213) 515-6576

10Kitchen Services

200+Reviews

24 hrsResponse Time

CSLB#1087602 Licensed

Before the Design

From an Older Kitchen to One That Works

The City of Industry is what its name says. It was incorporated on June 18, 1957, and today more than 3,000 businesses operate within its boundaries, while the 2020 census counted only 264 residents. Census estimates put the number of homes at around 40. Most are detached houses, and most are rented rather than owner-occupied. The houses that remain either predate incorporation, sit near the Industry Hills golf and recreation grounds, or stand in the small neighborhood beside City Hall.

The City's Housing Element describes this small residential base along with policies to preserve it and to encourage maintenance and rehabilitation. So a kitchen project here is uncommon. When it happens, it's usually an owner or a property manager rehabilitating one of a handful of older houses. This page is written for that situation.

Our first visit is about the room as it really is: measurements, the panel, the plumbing under the sink. A 3D drawing and a line-by-line estimate follow before you commit to anything.

Call (213) 515-6576

Request a Kitchen Remodeling Estimate

Share your City of Industry address, remodel goals, and timeline. A kitchen remodeling specialist will follow up with next steps.

Systems and Site

Utilities, Venting and a Protected Home

A few items deserve attention before the old kitchen comes out.

Living next to industry. Homes here share the city with warehouses, rail lines and truck routes along Valley Boulevard and the San Jose Creek corridor. That shapes a few kitchen decisions. If a kitchen window is replaced, it must meet the state energy rules for climate zone 9, which covers all five of Industry's ZIP codes, and the same products help with sound.
Plumbing. Rebuild the systems when the panel can't support a modern kitchen or the supply lines are galvanized and failing.
Clean job site. Tools and materials are stored neatly, and walkways stay clear for the household.

Kitchen Services

Our City of Industry Kitchen Services

A clear scope, one schedule and one team, whatever the size of the job.

CSLB licensed#1087602

Permit filingWe take care of it

In-house crewNo day-labor hand-offs

Written scopeEvery line listed

Choose What Matters Most

Use the cards to jump to the service details further down.

Cabinet Installation

Cabinet runs that store more and close softly.

Details for this service ↓

Granite countertop with an undermount sink

Countertops

Counters planned around prep, not just looks.

See how we do it ↓

Warm traditional kitchen with a tiled wall behind the counters

Backsplash

Tile or slab walls that wipe clean.

Price and process ↓

Kitchen Flooring

Tile or plank laid over a level base.

Kitchen Lighting

Brighter counters with LED strips and dimmers.

See details and cost ↓

Appliance Installation

Gas, power and venting sized to the new units.

Details and price ↓

Island or Peninsula

Islands sized to the aisles, or a peninsula.

Small Kitchen Remodeling

Compact kitchens that cook like big ones.

Scope and price ↓

Open-plan kitchen layout with granite surfaces

Layout Changes

A better layout in the same footprint, or a new one.

How it works here ↓

Completed modern white Shaker kitchen remodel

Full Kitchen Remodel

A gut remodel with one team and one plan.

Local notes and cost ↓

Plan Review and Permits

The Permit Process in City of Industry

City of Industry is an incorporated city, but LA County Public Works Building & Safety provides its building services, while the City handles planning. A kitchen permit is filed with the County's building office serving Industry, and planning or zoning questions go to the City. Zoning across the city is centered on employment uses.

Work	Usually needs	What to know
Painting and swapping hardware	Generally exempt	Purely cosmetic changes seldom require review.
Same-footprint remodel	Usually a combination permit	Plumbing and electrical reconnections count.
New circuits, lights or a panel upgrade	Electrical permit	Recessed lights and appliance circuits fall here.
Island sink or moved fixtures	Plumbing permit	Drain work is checked before it is covered.
New beam or wall change	Plan review	Drawings and sometimes calculations.

Before any design work, we confirm the home's lawful residential status. For a rehab of an existing legal home, that's usually a formality, but it matters if the scope grows, for example adding a unit or converting an outbuilding.
Mailing addresses don't settle jurisdiction here. Industry's boundaries wrap around parts of La Puente and Hacienda Heights, and the City's own Housing Element treats those neighboring communities as separate markets.
A La Puente or Hacienda Heights address may sit inside Industry, or the other way around.
We look up the parcel first. The best time to rehab a rental kitchen is during a vacancy, and the schedule is what owners ask about most.
A same-footprint replacement needs time for the permit, for cabinet lead times and for the work itself.
Ordering cabinets and appliances before the unit is vacant shortens the empty period considerably.

Service Details

How Each Service Works in City of Industry

The approach, the local factor to know and what it usually costs.

Storage first

Cabinet Installation in City of Industry, CA

Storage should follow what you cook and keep, not a catalog.

We measure every wall and opening, then plan drawers, pull-outs and tall storage before door styles. Toe kicks, fillers and crown are finished to the same standard as the doors.

City of Industry homes

Replace when the sink base has rotted from a slow leak, drawers have failed, or the layout forces tenants to cook on a few feet of counter.

Before anything is ordered

Choose a finish that lasts
Note outlet locations
Choose door style last
Plan the trash pull-out

Book a Free Estimate Our cabinet installation service →

What do installed cabinets cost here?

Installed cabinetry typically costs

$260–$410 per foot, installed.

Ceiling-height uppers and pantry units add to the total.

Durable surfaces

Countertop Installation in City of Industry, CA

Good counters start with level cabinets underneath.

The sink and faucet are chosen first, because the cut-outs depend on them. Joints are filled, leveled and polished on site.

City of Industry detail

Wipe-clean finishes, such as quartz, porcelain and semi-gloss paint, make fine dust easier to manage.

Before anything is ordered

Template after cabinets are set
Match the backsplash height
Confirm faucet holes
Pick a low-upkeep surface

Book a Free Estimate How we handle countertop installation →

What should I budget for City of Industry countertops?

Plan on

$48–$79 per square foot, fabricated and set.

Premium colors and thicker slabs sit at the top.

Tile with clean lines

Backsplash Installation in City of Industry, CA

Tile layout around outlets and windows separates good work from average.

Damaged drywall is repaired before any tile goes up. Every joint is cleaned and checked before we move on.

Before anything is ordered

Confirm hood position
Plan the edge trim
Lay out outlet cuts
Decide the height

Book a Free Estimate Call (213) 515-6576

How much is backsplash installation in City of Industry?

Expect a backsplash to cost

$15–$52 per square foot of tile.

Trim pieces and niches add a little.

A flat start

Kitchen Flooring in City of Industry, CA

Transitions matter as much as the floor itself.

Porcelain, ceramic, vinyl plank and engineered wood all work with the right prep. Transitions are finished with matching or metal strips.

Before anything is ordered

Pick a wet-safe surface
Test slab moisture
Decide on under-cabinet runs
Protect during the build

Book a Free Estimate More about kitchen flooring →

What do kitchen floors run in City of Industry?

Expect tile flooring to cost

$7–$11 per square foot of floor.

Prep work, not the tile, often drives the figure.

No more shadows

Kitchen Lighting in City of Industry, CA

Lighting is cheap to plan and expensive to add later.

Wiring is finished before drywall patching, tile and paint. Night lighting under the toe kick is an easy add.

Local note

Better-sealed windows with laminated or dual-pane glass reduce noise and dust.

Before anything is ordered

Place switches where you reach
Plan under-cabinet strips
Plan night lighting
Finish wiring before tile

Book a Free Estimate Kitchen lighting in detail →

Kitchen pendant and recessed lighting remodel

What does an electrician charge for kitchen lighting in City of Industry?

A City of Industry lighting package typically comes to

$940–$3,650 for a typical kitchen.

More zones and dimmers add a little.

Ready for the new range

Appliance Installation in City of Industry, CA

A range that does not fit its opening turns delivery day into a second project.

We check width, depth and door swing before you buy. The hood duct is sealed and capped outside.

Worth knowing in City of Industry

A ducted range hood with a tight backdraft damper keeps outside air from leaking in when it's off.

Before anything is ordered

Plan the hood duct
Choose gas or induction
Time the delivery
Review spec sheets

Book a Free Estimate Appliance installation: the service page →

What does appliance installation run in City of Industry?

Appliance installation typically costs

$520–$2,600 per kitchen.

Wall ovens and cooktops need exact cut-outs.

The right fit

Kitchen Island or Peninsula in City of Industry, CA

Seating, storage and prep space all compete for the island.

We decide early whether the island needs plumbing or power. Pendants are centered on the finished top.

Before anything is ordered

Decide on a sink
Check floor support
Pick storage side
Size for stools

Book a Free Estimate Kitchen islands overview →

Butcher block kitchen island prep surface

What should I budget for a City of Industry island?

A new island here runs about

$4,700–$19,000 for a complete island.

Moving plumbing into the island costs the most.

Small kitchen, full function

Small Kitchen Remodeling in City of Industry, CA

Small rooms benefit from light finishes and good lighting.

Drawers replace base doors to use every inch. We plan a landing spot next to every appliance.

Before anything is ordered

Size the sink
Choose compact appliances
Draw door swings to scale
Pick light finishes

Book a Free Estimate Read about small kitchen remodeling →

How much should I plan for a small City of Industry kitchen?

Expect a small kitchen to cost

$23,500–$30,500 for the complete room.

Premium appliances push it higher.

Layout Planning

Layouts and Looks That Fit City of Industry

Nearly half of Industry's homes date from the 1950s, and a sizable share predate 1940. With a stock that small, the Census percentages swing a lot from year to year, but the pattern is clear: older, mostly single-family houses, many of them rentals. Systems are likely original or patched. An older house that has been rented for years has often had repairs rather than upgrades. Expect to look at the electrical panel, the wiring feeding the kitchen, and the supply and drain lines before anything else.

Rehab or replace: The Housing Element's emphasis on maintenance and rehabilitation suggests a sensible way to approach an older kitchen. Start with an inspection, then decide what to keep. Keep and repair when the cabinet boxes are solid and dry, the layout works and the problem is worn surfaces. New doors or paint, a quartz top, a new sink and faucet and better lighting can make an older kitchen serviceable for years at the low end of the range.
The houses: Durability matters more than fashion. A rental kitchen needs to survive several tenants with minimal maintenance. Energy use is part of the plan. The City's Housing Plan supports energy-efficiency improvements, which fits naturally into a kitchen rehab: LED lighting, efficient appliances, better windows and, where a water heater is due, a high-efficiency replacement.
Living next to industry: Weather-stripped exterior doors near the kitchen help too.

Cost Guide

Kitchen Costs in City of Industry

Plan on $87,500–$165,000 for a complete City of Industry kitchen with a changed layout.

What does a complete City of Industry kitchen remodel cost?

For new everything plus a changed layout, $87,500–$165,000 is the realistic range. Your estimate is written from your measured room.

Full renovation$87,500–$165,000All trades included

Scope and cost

Lowest starting price first:

Compact kitchen or secondary unit

A full rebuild of a compact space.

$23,500–$30,500

Refresh: new counters, fronts, fixtures and lighting

The lightest scope: surfaces, sink and lighting.

$26,000–$46,500

New cabinets, counters and appliances in place

Cabinets and counters renewed, the plan stays.

$46,500–$87,500

Layout change

The full remodel: new layout, cabinets, counters and lighting.

$87,500–$165,000

Structural or premium work

Structural changes or premium materials throughout.

$154,500–$257,500

Please do not add the service ranges together. A full remodel shares demolition, rough-in and oversight.

Because the houses are older, a rehab often carries electrical and plumbing work that a newer home wouldn't. We list those as separate lines so an owner can see what's maintenance and what's improvement, which also helps when deciding between selective upgrades and full replacement.

Request a Project-Specific Estimate Call (213) 515-6576

Process

Your Remodel, Step by Step

Step 1

Assessment

Room dimensions, system condition and your wish list, all recorded.

Step 2

Design review

Walk through the 3D model and finalize the plan.

Step 3

Approval

Estimate signed, drawings submitted, permit issued.

Step 4

Construction

Our crew sequences each trade and cleans up daily.

Step 5

Close-out

Inspections passed, details finished, warranty explained.

Service Area

Our City of Industry Service Area

We are in City of Industry regularly for estimates and builds.

Also nearby:

La Puente Valinda Hacienda Heights Avocado Heights Baldwin Park La Habra Heights All service areas

Project Gallery

Kitchen Ideas From Our Project Gallery

Bright contemporary kitchen remodel inspiration

Efficient Layout

Bright cabinets, continuous prep, and clear aisles

Cabinet Refresh

Shaker cabinets, soft-close hardware, and taller pantry storage

Peninsula Prep

Butcher-block prep edge when a full island would crowd circulation

Countertop Focus

Quartz perimeter planned for continuous prep

Lighting Layers

Recessed ambient plus under-cabinet task lighting

Flooring Transitions

Durable flooring detailed into adjoining rooms

Appliance Fit

Measured openings before ordering ranges and refrigeration

Warm Traditional

Classic door styles selected by homeowner preference

Reviews

What Homeowners Say About Our Kitchen Team

200+ reviews from homeowners across Los Angeles County.

★★★★★

"They measured carefully, showed a 3D layout, and did not push an island our aisle could not support. Cabinets and quartz look sharp, and the job site stayed clean."

Maria G., Los Angeles, CA

★★★★★

"Storage was the problem, tall pantry and drawer bases fixed it. Lighting under the cabinets made the counters actually usable at night."

Daniel & Rosa L., Los Angeles, CA

★★★★★

"Permits and inspections were handled without us chasing paperwork. One team for cabinets, counters, and appliances."

Hector P., Huntington Park, CA

★★★★★

"Peninsula instead of a forced island, exactly what our floor plan needed. Soft-close everywhere and a clear itemized quote."

Ana R., Cudahy, CA

★★★★★

"They coordinated the range hood vent correctly and explained electrical upgrades before work started. Professional from consult to walkthrough."

Luis M., Bell, CA

★★★★★

"Transparent pricing and a project manager who answered texts. The finished Shaker kitchen feels like our house, just updated."

Patricia S., Commerce, CA

FAQs

City of Industry Kitchen Remodel Questions

How expensive is a City of Industry kitchen remodel? +

A same-layout refresh starts around $26,000, a mid-scope remodel is $46,500–$87,500, and changing the layout costs $87,500–$165,000.

Who issues kitchen permits in City of Industry? +

LA County Public Works Building & Safety provides building services for the city. Planning questions go to the City.

My address says La Puente. Am I in Industry? +

Possibly. Boundaries here are irregular, so we check the parcel rather than relying on the mailing name.

Do I need a planning approval for an interior kitchen? +

Usually not for an existing legal home kept within its walls. We confirm the home's residential status first.

How do I choose between quartz and granite? +

Quartz needs no sealing and comes in consistent colors; granite is natural stone with more variation. We bring samples of both.

Can I change my mind after the plan is approved? +

Small changes are usually fine before materials are ordered. After that, we price any change in writing first.

Ready for a Better City of Industry Kitchen?

Tell us what you have in mind and when you would like to start. Call (213) 515-6576 or use the form; we answer within 24 hours, Mon–Sat 7AM–5PM.

Free estimate with a 3D design
Free, no-obligation estimate
Permit and inspections handled

Call (213) 515-6576 Email Us

Request Your Consultation

Share your goals and timeline. A kitchen remodeling specialist will follow up.